Why this course?

Description

Engineering Mechanics, Syllabus of All the Universities is almost derived from Pune and Mumbai University. So In this course, I will be sharing my video lectures conducted for SPPU and MU 2022-23 Batches.

Students of Universities like

Shivaji University Kolhapur, Dr Baba Saheb Ambedkar University, Nagpur University and Sant Baba Ghadge University Amravati can Enroll in this course as you can verify, 85% of the syllabus is exactly same.

 

Syllabus to be covered in this Course-

 

UNIT 1

1.1 System of Coplanar Forces: Classification of force systems, Principle of transmissibility, composition and resolution of forces. 1.2 Resultant: Resultant of coplanar and Non Coplanar (Space Force) force system (Concurrent forces, parallel forces and non-concurrent Non-parallel system of forces). Moment of force about a point, Couples, Varignon’s Theorem. Force couple system. Distributed Forces in plane. 06 Centroid: First moment of Area, Centroid of composite plane Laminas

 

UNIT 2

2.1 Equilibrium of System of Coplanar Forces: Conditions of equilibrium for concurrent forces, parallel forces and nonconcurrent non- parallel general forces and Couples. Equilibrium of rigid bodiesfree body diagrams. 2.2 Equilibrium of Beams: Types of beams, simple and compound beams, type of supports and reaction: Determination of reactions at supports for various types of loads on beams. (Excluding problems on internal hinges)

 

UNIT 3

Friction: Revision of Static Friction, Dynamic/ Kinetic Friction, Coefficient of Friction, Angle of Friction, Laws of friction. Concept of Cone of friction. Equilibrium of bodies on inclined plane. Application to problems involving wedges and ladders.

 

UNIT 4

Kinematics of Particle: Motion of particle with variable acceleration. General curvilinear motion. Tangential& Normal component of acceleration, Motion curves (a-t, v-t, s-t curves). Application of concepts of projectile motion and related numerical.

 

UNIT 5

Kinematics of Rigid Body: Translation, Rotation and General Plane motion of Rigid body. The concept of Instantaneous center of rotation (ICR) for the velocity. Location of ICR for 2 link mechanism. Velocity analysis of rigid body using ICR.

 

UNIT 6

6.1 Kinetics of a Particle: Force and Acceleration: -Introduction to basic concepts, D’Alemberts Principle, concept of Inertia force, Equations of dynamic equilibrium, Newton’s second law of motion. (Analysis limited to simple systems only.) 04 6.2 Kinetics of a Particle: Work and Energy: Work Energy principle for a particle in motion. Application of Work – Energy principle to a system consists of connected masses and Springs. 04 6.3 Kinetics of a Particle: Impulse and Momentum: Principle of linear impulse and momentum. Impact and collision: Law of conservation of momentum, Coefficient of Restitution. Direct Central Impact and Oblique Central Impact. Loss of Kinetic Energy in collision of inelastic bodies.

 

Also Pune syllabus is

Unit I Resolution and Composition of Forces --Principle of statics, Force system, Resolution and composition of forces, Resultant of concurrent forces. Moment of a force, Varignon’s theorem, resultant of parallel force system, Couple, Equivalent force couple system, Resultant of parallel general force system

Unit II Distributed Forces and Friction -- Moment of area, Centroid of plane lamina and wire bends, Moment of Inertia. Friction- Laws of friction, application of friction on inclined planes Wedges and ladders friction Application to flat belt

Unit III Equilibrium -- Free body diagram Equilibrium of concurrent, parallel forces in a plane Equilibrium of general forces in a plane Equilibrium of three forces in a plane, Types of beams, simple and compound beams, Type of supports and reaction, Forces in space, Resultant of concurrent and parallel forces in a space, Equilibrium of concurrent and parallel forces in a space.

Unit IV Analysis of Structures--Two force member, Analysis of plane trusses by Method of joints Analysis of plane trusses by method of section, Analysis of plane frames, Cables subjected to point load multi force member.

Unit V Kinematics of Particle --Kinematics of linear motion- Basic concepts Equation of motion for constant acceleration Motion under gravity, Variable acceleration motion curves. Kinematics of curvilinear motion- Basic Concepts Equation of motion in Cartesian coordinates Equation of motion in path coordinates Equation of motion in polar coordinates Motion of projectile.

Unit VI Kinetics of Particle  Kinetics- Newton’s Second Law of motion Application of Newton’s Second Law. Work, power, energy, conservative and non-conservative forces Conservation of energy for motion of particle, Impulse, Momentum, Direct central impact. Coefficient of restitution, Impulse Momentum principle of particle

 

So Complete syllabus of Pune and Mumbai University is shared. Compare and Start Learning!